Fleet-Hydrol
  Specialists in Industrial and Marine Hydraulics                                              Celebrating 50 years of service!

About Us

Contact Us

Marine

Industrial

Phone
(02) 9939 1866

Fax
(02) 9938 6078

 
 

Mo-Clamp Collision Repair Products
 

For more information on any of the items listed below, contact us for fast and friendly attention and service.
 
Click here for Mo-Clamp Safety and Maintenance Information.
 
  M53 "A" clamp with pull ring for 1/4 chain
 = Grips narrow seams & ridges.
 = Raised "bolt-stoppers" hold bolts stationery for one-handed operation.
 = Hardened steel cross-hatched teeth. Excellent for use with slide hammer.
 = 3 tonne capacity.
 = Grip surface 39 mm wide X 19 mm deep. O/A length 89 mm
 =  Weight 0.9 Kg
 =  Spares - #55046 bolt, #5525 nut, bolt & washer #120 mini pull ring.
     
  M54 Mini spring clamp for 1/4 chain only
 = For light sheet metal in hard-to-get places.
 = Spring loaded for easy opening. Oval loop provides easy hook up.
 = Raised "ears" to hold bolts stationery for one-handed tightening.
 = Cross hatched tooth design for aggressive grip
 = 2.7 tonnes capacity.
 = Grip surface 39 mm W X 19 mm deep. O/A length 89 mm
 =  Weight 1.36 Kg
 = Spares - #5225 nut, bolt & washer #5220 clevis pin & rue clip #4043 oval loop #840078 spring.
     
  M200 "C" clamp
 = Fits over flange, frame-horn or around lip to pull from behind.
 = Self tightening.
 = Straight cut tooth design.
 = 5.4 tonne capacity.
 = Grip surface 50 mm wide X 16 mm O/A length 178 mm
 = Weight 0.91 Kg
 = Spares - #5130 nut & bolt #9701 wedge.
     
  M205 Dyna-Mo C-clamp
 = For ease of getting over lips & edges. Spring-loaded for easy opening. Round wedge keeps twist out of chain.
 = Drop forged, cross hatched tooth design.
 = 4.5 tonne capacity.
 = Gripping surface 32 mm X 13 mm. O/A length 178 mm
 = Weight 0.91 Kg
 = Spares - #5246 nut, bolt, spring & washer #9702 wedge
     
  M300 "JR" clamp
 = Original Mo-Clamp general purpose design.
 = New angled tooth design for aggressive pulling.
 = 4.5 tonne capacity.
 = Gripping surface 38 mm X 19 mm. O/A length 229 mm
 = Weight 2722 Kg
 = Spares - #5335 nut, bolt & washer, #9701 wedge
     
  M250 Mini "C" clamp
 = Light versatile unit to reach around flanges, cowls, pinch-welds & lips.
 = Buts against narrow panels.
 = Drop forged round design to prevent chain-twist.
 = 4.5 tonne capacity.
 = Gripping surface 38 mm X 19 mm. O/A length 216 mm
 = Weight 2722 Kg
 = Spares - #5335 nut, bolt & washer, #9701 wedge
     
  M550 "Tight-opening" clamp
 = For hard-to-pull areas like frame rail ends, , core-supports, box-sides & cowls.
 = Original straight-cut tooth design
 = 2722 Kg capacity
 = Gripping surface 38 mm X 13 mm. O/A length 216 mm
 = Weight 2.27 Kg
 = Spares - #5250 bolt, spring & washer
     
  M305 Dyna-Mo "JR" clamp
 = Thin-edged nose, self-tightening clamp for hard-to-reach places.
 = Drop forged round design to prevent chain-twist.
 = 2.72 tonne capacity
 = Gripping surface 32 mm X 25 mm. O/A length 178 mm
 = Weight 0.91 Kg
 = Spares - #5247 nut, bolt, spring & washer, #9702 wedge
     
  M400 "W" clamp
 = Self-tightening super clamp with ultra-wide grip.
 = Straight cut tooth design
 = 5.44 tonne capacity
 = Gripping surface 108 mm. O/A length 241 mm
 = Weight 4.99 Kg
 = Spares - #5120 nut & bolt, #9801 wedge
     
  M405 Dyna-Mo "W" clamp
 = New design - self-tightening clamp with wide grip.
 = Drop-forged round wedge to grab thin metal without tearing.
 = Aggressive cross-hatched tooth design.
 = 2.72 tonne capacity
 = Gripping surface 57 mm X 45 mm. O/A length 178 mm
 = Weight 1.36 Kg
 = Spares - #5247 nut bolt spring & washer, #9702 wedge
     
  M750 Lip-Grip with Side-pull Bracket
 = Multi-purpose sandwich-style clamp for quarter panels or floor sections.
 = Gator teeth for secure grip. Chain loop permits pull at any angle.
 = Side pull allows 90 degree two-directional pulls.
 = 3.63 tonne capacity
 = Gripping surface 51 mm X 127 mm. O/A length 165 mm
 = Weight 3.18 Kg
 = Spares - #5225 nut & bolt
     
  M1000 Handy-Hook
 = Great time-saving easy hook-up system for 3/8 chain - no hook needed on the chain - no chain too long.
 = Heat-treated alloy-steel. Pulling-slots may be used with #900 hole-pull adapter.
 = 4.5 tonne capacity
 = O/A length 165 mm
 = Weight 0.91 Kg
     
  M1250 Panel-Puller
 = Light & easy-to-use with slide hammer or pulling post. For fender, deck-lids, door-posts & other openings.
 = Heat-treated alloy-steel
 = 2.72 tonnes capacity
 = 82 mm grip. O/A length 203 mm
 = Weight 1.36 Kg
     
  M1300 Sill-Hook
 = Handy, all-round tool for almost any application.
= Round opening allows pulling with slip-hook
 = Improved casting process for greater strength.
= Straight-cut tooth design for superior grip & pull
 = 4.54 tonnes
 = Gripping surface 63 mm X 25 mm. O/A length 216 mm
 = Weight 2.27 Kg
     
  M1850 Inline Slider Clamp
 = New generation self-tightening clamp for in-line pull on flanges.
= Finger grips for easy positioning.
 = Heat-treated allow steel
 = 4.54 tonnes capacity
 = Gripping surface 76 mm. O/A length 178 mm
 = Weight 1.54 Kg
 = Spares - #185005 jaw "A" #185006 jaw "B"
     
  M2100-2MA Multi-adapter plate
 = Fits most McPherson strut bolt-patterns.
= Accessories provide unlimited body & frame pulls.
= Use #1450 or #1500 pull ring for fast hook-ups for frame-horns, doorposts, brackets, cowls & axles.
= Includes three 4-way large-base legs for good support.
 = 4.54 tonne capacity
 = O/A size 228 mm
 = Weight 4.54 Kg
 = Spares - #5230 bolt & washer, #9450 leg, bolt & washer.
     
  M2450 Boltless Strut-tower Puller
 = Fast, reliable tool for pulling strut towers without bolts.
= Corrects chassis back to specifications.
 = NOTE - strut tower must be removed.
 = 2.72 tonne capacity
 = O/A length 127 mm
 = Weight 3.63 Kg
 = Spares - #4051 eye nut, #100441 angle puller, #500053 bolt
     
  M3071 Mo-Try Anchor Pot
 = For full 360 degree pull without chain touching floor - the harder the pull, the firmer it wedges.
= Top is flush with floor surface when not in use & unit may be re-located.
 = Requires 89 mm cored hole in concrete floor
 = 9072 Kg (10 tonnes)
 = Weight 3.18 Kg
     
  M4015 Frame rack clamp with 4 angle brackets
 = For vehicles with horizontal pinch-welds ( late Honda etc).
= Angles may be drilled to fit frame racks & benches.
 = Includes two 1/2" shackles
 = 4.54 tonne capacity
 = Gripping surface 330 mm. P/A length 406 mm
 = Weight 22.68 Kg
 = Spares - #5200 nut, bolt & washer, #840076 spring, #4016 frame-rail angle bracket (each).
     
  M4020 Four-way Pull Clamp
 = Recessed pockets to hold bolts stationary for easy tightening.
 = Includes shackle & oval loop.
 = 5.54 tonne capacity.
 = Gripping surface 102 mm X 19 mm. O/A length 203 mm
 = Weight 5.45 Kg
 = Spares - #4046 Spring, #5355 nut, bolt & washer.
     
  M4030 Three-way Pull Clamp
 = Clamp has recessed pockets for easy tightening.
 = Includes #4043 oval loop.
 = 5.44 tonne capacity.
 = Gripping surface 102 mm X 19 mm. O/A length 356 mm
 = Weight 3.63 Kg
 = Spares - #4045 nut, bolt & washer, #402801 rocker-in
     
  M5616 Door-post Puller/Twister
 = For bolt-type hinge pillars. "V" shaped gusset allows twist whilst pulling.
 = 3 positions from which to pull.
 = 1.8 tonne capacity
 = 12 mm & 39 mm slots. O/A length 133 mm
 = Weight 0.91 Kg
     
  M6300 Nylon Sling
 = For protection where chain may cause damage.
 = May be made into a cinch.
 = Capacities - Vertical 2268 Kg, Choke 1814 Kg, Basket 4536 Kg
 = O/A length 762 mm Width 75 mm
 = Weight 0.45 Kg
     
  M6301 Nylon Sling with Metal Triangles
 = For protection where chain may cause damage.
 = Capacities - Vertical 907 Kg, choke 907 Kg, basket 1814 Kg
 = O/A length 521 mm Width 100 mm
 = Weight 1.81 Kg
     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 Copyright © 2010 Hydraulic Specialists Pty Ltd trading as Fleet-Hydrol |  Web by Made to Measure Marketing