FLEET-HYDROL

Home
Ind cat
Ind gallery
Marine cat
Marine gallery
Contact

 

MO-CLAMP Collision Repair Tools - Page 4

Click HERE For general introduction, safety & maintenance

M2100-2MA Multi-adapter plate
Fits most McPherson strut bolt-patterns. Accessories provide unlimited body & frame pulls. Use #1450 or #1500 pull ring for fast hook-ups for frame-horns, doorposts, brackets, cowls & axles.
Includes three 4-way large-base legs for good support
4.54 tonne capacity
O/A size 228 mm
Weight 4.54 Kg
Spares - #5230 bolt & washer, #9450 leg, bolt & washer
M2450 Boltless Strut-tower Puller
Fast, reliable tool for pulling strut towers without bolts. Corrects chassis back to specifications.
NOTE - strut tower must be removed
2.72 tonne capacity
O/A length 127 mm
Weight 3.63 Kg
Spares - #4051 eye nut, #100441 angle puller, #500053 bolt
M3071 Mo-Try Anchor Pot
For full 360 degree pull without chain touching floor - the harder the pull, the firmer it wedges. Top is flush with floor surface when not in use & unit may be re-located.
Requires 89 mm cored hole in concrete floor
9072 Kg (10 tonnes)
-
Weight 3.18 Kg
N/A
M4015 Frame rack clamp with 4 angle brackets
For vehicles with horizontal pinch-welds ( late Honda etc). Angles may be drilled to fit frame racks & benches
Includes two 1/2" shackles
4.54 tonne capacity
Gripping surface 330 mm. P/A length 406 mm
Weight 22.68 Kg
Spares - #5200 nut, bolt & washer, #840076 spring, #4016 frame-rail angle bracket (each)


Click this backbttn button to return to catalogue page index
HYDRAULIC SPECIALISTS PTY LTD
35 Orchard Road, Brookvale  NSW Australia 2100
Ph: 61 2 9939 1866 Fax: 61 2 9938 6078
sales@fleet-hydrol.com.au