FLEET-HYDROL

Home
Ind cat
Ind gallery
Marine cat
Marine gallery
Contact

 

MO-CLAMP Collision Repair Tools - Page 1

Click HERE For general introduction, safety & maintenance

M53 "A" clamp with pull ring for 1/4 chain
Grips narrow seams & ridges. Raised "bolt-stoppers" hold bolts stationery for one-handed operation
Hardened steel cross-hatched teeth. Excellent for use with slide hammer.
3 tonne capacity
Grip surface 39 mm wide X 19 mm deep. O/A length 89 mm
Weight 0.9 Kg
Spares - #55046 bolt, #5525 nut, bolt & washer #120 mini pull ring
M54 Mini spring clamp for 1/4 chain only
For light sheet metal in hard-to-get places. Spring loaded for easy opening. Oval loop provides easy hook up. Raised "ears" to hold bolts stationery for one-handed tightening
Cross hatched tooth design for aggressive grip
2.7 tonnes capacity
Grip surface 39 mm W X 19 mm deep. O/A length 89 mm
Weight 1.36 Kg
Spares - #5225 nut, bolt & washer #5220 clevis pin & rue clip #4043 oval loop #840078 spring
M200 "C" clamp
Fits over flange, frame-horn or around lip to pull from behind. Self tightening
Straight cut tooth design
5.4 tonne capacity
Grip surface 50 mm wide X 16 mm O/A length 178 mm
Weight 0.91 Kg
Spares - #5130 nut & bolt #9701 wedge
M205 Dyna-Mo C-clamp
For ease of getting over lips & edges. Spring-loaded for easy opening. Round wedge keeps twist out of chain
Drop forged, cross hatched tooth design
4.5 tonne capacity
Gripping surface 32 mm X 13 mm. O/A length 178 mm
Weight 0.91 Kg
Spares - #5246 nut, bolt, spring & washer #9702 wedge
M300 "JR" clamp
Original Mo-Clamp general purpose design
New angled tooth design for aggressive pulling
4.5 tonne capacity
Gripping surface 38 mm X 19 mm. O/A length 229 mm
Weight 2722 Kg
Spares - #5335 nut, bolt & washer, #9701 wedge


Click this backbttn button to return to catalogue page index
HYDRAULIC SPECIALISTS PTY LTD
35 Orchard Road, Brookvale  NSW Australia 2100
Ph: 61 2 9939 1866 Fax: 61 2 9938 6078
sales@fleet-hydrol.com.au